Solder Tampal Ujian Peralatan SPI
Solder tampal testing equipment SPI
SPI: SPI is the English abbreviation of Solder Paste Inspection in the SMT industry. It is used to detect the height, volume, area, shape, bridge, short circuit and offset of solder paste after solder paste printing. There are two types of SPI devices: offline machine and online machine.
Kelebihan
Simple programming: The 3D-SPI solder paste ketebalan pengesan biasanya converts the TXT auxiliary text file automatically generated after the placement machine is programmed into a file in the required format, and obtains the position number, component serial number, X coordinate, and Y coordinate from the SPI. , the rotation direction of the components, and then the system will automatically generate the layout of the circuit to determine the position parameters of each component and the parameters to be detected. After completion, fine-tune the detection parameters of each component according to the process requirements.
Easy to operate: Since the 3D-SPI solder paste ketebalan detector pada asasnya uses highly intelligent software, it does not require the operator to have extensive professional knowledge to operate.
Tinggi fault coverage: Due to the use of high-precision optical instruments and high-intelligence testing software, the usual SPI equipment can detect a variety of production defects, and the fault coverage can reach 90%.
Reduce production costs: Since the SPI equipment can be placed in the reflow oven to detect the PCB board, defects caused by various reasons can be found in time without waiting for the PCB board to pass through the reflow oven before testing, which greatly reduces production cost.
